1 monitor de escenario QUBE 115
Por Musiser el 10/02/2015 en Zaragoza
PROFESIONAL
Expiración: 10/09/2016 | Visto 848 veces
300€
El anuncio ha sido retirado.
Otros anuncios que te pueden interesar
-
Monitor escenario 12” en Zaragoza150 €
-
Vendo 1 monitor Event Tr8 en Zaragoza50 €
-
3 TARIMAS DE 2 X 1 M en Barcelona750 €
-
Monitor BEHRINGER B250D. en Madrid130 €
-
Altavoz Monitor Hughes & Kettner 12/2 en Madrid100 €
Two way monitor speaker system; 15” woofer - 2” coax driver
The QM 115 floor monitor features a low profile cabinet design employing a COAXIAL 15” LF woofer, a concentric mounted HF driver with a 3” titanium diaphram and a 2” exit. The use of a coaxial speaker is quite close to a one point source and offers 70° conical dispersion which excels for monitoring applications Vs conventional floor monitors employing a individual woofer and a separate HF horn / driver. The result is a monitor with an excellent vocal presence, clarity, and provides flat response without coloration as well as superior anti feedback resistance. The built in full range passive crossover, also offers bi amped operation via a switch on the input panel. The QM 115 is capable of up to 133dB SPL allowing it to be used in concert applications where instrument stage volumes can sometimes overwhelm monitor mixes. The QM 115 also excels as a Drum monitor especially when it is used along with a QS 115 or QM 118 subwoofer. The cabinet is constructed with 18 mm (3/4”) Baltic birch plywood, is internally braced to prevent undesired resonance and features a scratch and scuff resistant black paint finish. Six M-10 fly points provide for additional applications as a flying side fill, as a FOH speaker and as a truss mounted front fill.
http://www.fbt.it/ENG/QUBE/PRODOTTI/SPEAKERS/QM-Series/QM-115/
material procedente de epositor
portes no incluidos
The QM 115 floor monitor features a low profile cabinet design employing a COAXIAL 15” LF woofer, a concentric mounted HF driver with a 3” titanium diaphram and a 2” exit. The use of a coaxial speaker is quite close to a one point source and offers 70° conical dispersion which excels for monitoring applications Vs conventional floor monitors employing a individual woofer and a separate HF horn / driver. The result is a monitor with an excellent vocal presence, clarity, and provides flat response without coloration as well as superior anti feedback resistance. The built in full range passive crossover, also offers bi amped operation via a switch on the input panel. The QM 115 is capable of up to 133dB SPL allowing it to be used in concert applications where instrument stage volumes can sometimes overwhelm monitor mixes. The QM 115 also excels as a Drum monitor especially when it is used along with a QS 115 or QM 118 subwoofer. The cabinet is constructed with 18 mm (3/4”) Baltic birch plywood, is internally braced to prevent undesired resonance and features a scratch and scuff resistant black paint finish. Six M-10 fly points provide for additional applications as a flying side fill, as a FOH speaker and as a truss mounted front fill.
http://www.fbt.it/ENG/QUBE/PRODOTTI/SPEAKERS/QM-Series/QM-115/
material procedente de epositor
portes no incluidos
OfertasVer todas
-
-35%Set de grabación completo de Focusrite184 €Ver oferta
-
-40%¡Precio mínimo histórico! AKAI MPK 261298 €Ver oferta
-
beyerdynamic DT-770 Pro138 €Ver oferta
Usuario
Musiser