Modulo eurorack Malekko (Wiard) Dual Borg (Doble Filtro)
Por stereonoss el 17/11/2015 en Barcelona
Expiración: 15/04/2016 | Visto 409 veces
290€
Este anuncio ha expirado.
Otros anuncios que te pueden interesar
-
OFERTA !!!! Cre8audio Módulo Eurorack (Cellz) en Barcelona40 €
-
Mutable Instruments Panels en Madrid10 €
-
Erica Synths Pico VCA2 eurorack modulo en Cantabria50 €
-
Instruo Arbhar V2 modulo de Eurorack en Barcelona540 €
-
395 €
Vendo este modulo en perfecto estado como nuevo, ni marcas de uso ni marcas de tornillos ni nada, con embalaje original, prácticamente sin uso... Envío a toda la península (10euros). Portes a cargo del comprador.
DETAILS
Unlike classic vactrol filters or lopass gates the Borg has a resonance circuit borrowed from the Korg MS-20 which sounds a little more dirty. A control blends the filter characteristic from lowpass over bandpass to highpass. The Borgs are more than just 12dB/octave filters: the resonance control is a push-pull potentiometer that turns the filter into a VCA.
The signal path of the Dual Borg is selectable: Series or Parallel.
The Series mode, when you plug into either in 1, or in 2, or even both inputs (as a mix), the signal is routed through the Borg I then the Borg II filter and both out 1 and out 2 have the same signal. Parallel mode is flexible depending on the in- and output signals. a) a single input into in 1 or in 2 is routed through both filters side by side, and a single output (either out 1 or out 2) will give you a mix of both filters. b) If you have only one input but two outputs, out 1 is the Borg I filter only and out 2 is Borg II only. c) If you have two inputs and two outputs, then each filter is completely separate: in 1 and out 1 is Borg I, in 2 and out 2 is Borg II.
tags: doepfer, modular, semi-modular, cwejman, make noise, mutable instruments, math,
DETAILS
Unlike classic vactrol filters or lopass gates the Borg has a resonance circuit borrowed from the Korg MS-20 which sounds a little more dirty. A control blends the filter characteristic from lowpass over bandpass to highpass. The Borgs are more than just 12dB/octave filters: the resonance control is a push-pull potentiometer that turns the filter into a VCA.
The signal path of the Dual Borg is selectable: Series or Parallel.
The Series mode, when you plug into either in 1, or in 2, or even both inputs (as a mix), the signal is routed through the Borg I then the Borg II filter and both out 1 and out 2 have the same signal. Parallel mode is flexible depending on the in- and output signals. a) a single input into in 1 or in 2 is routed through both filters side by side, and a single output (either out 1 or out 2) will give you a mix of both filters. b) If you have only one input but two outputs, out 1 is the Borg I filter only and out 2 is Borg II only. c) If you have two inputs and two outputs, then each filter is completely separate: in 1 and out 1 is Borg I, in 2 and out 2 is Borg II.
tags: doepfer, modular, semi-modular, cwejman, make noise, mutable instruments, math,
OfertasVer todas
-
-35%Set de grabación completo de Focusrite184 €Ver oferta
-
-40%¡Precio mínimo histórico! AKAI MPK 261298 €Ver oferta
-
-8%Behringer X Air XR18645 €Ver oferta
Usuario
Registrado 09/03/2009
Comentarios17
Posts en foros3
Seguidores9
Fotos3
Mercasonic Score