Monitores activos Event Project Studio 6 100 w

Monitores activos Event Project Studio 6 100 w

Costaron más de 160.000 pesetas la pareja en Leturiaga, año 2001.

Se venden a 370 euros la pareja.

SE VENDEN, no se cambian por nada. Absténganse de ofertar trueques en ese sentido. LOS PORTES SON POR CUENTA DEL COMPRADOR. CADA MONITOR PESA CASI 11 KILOGRAMOS.

Impecable estado y sonido para mezcla cercana. Potencia sobrada. Nitidez tanto en graves como en agudos.

Inmejorables críticas y comentarios en la prensa y el público especializado:

http://www.sonicstate.com/digital/comments.cfm?modelid=1439
http://www.sonicstate.com/digital/model.cfm?modelID=1439

Manual de instrucciones y especificaciones:
http://audio.manualsonline.com/manuals/mfg/event_electronics/6.html

SPECIFICATIONS

LF driver: PS6: 6½”; magnetically shielded mineral
filled polypropylene cone with high temperature voice coil
and damped rubber surround.

HF driver: 1" magnetically shielded natural silk dome with ferrofluid
voice coil coolant.

Frequency response: PS6: 45Hz – 20kHz, ±3dB, Ref 500Hz

Crossover: PS6: 2.6kHz active 4th order asymmetrical

LF amplifier power: 70W

HF amplifies power: 30W

Noise: >100dB below full output, 20kHz bandwidth, unweighted

Input connectors: XLR and ¼" connector accepts balanced or unbalanced
sources

Polarity: Positive signal at + input produces outward LF cone
displacement

Input impedance: 40kW balanced, 20kW unbalanced

Input sensitivity. 0.9V input produces full output with Input Sensitivity
control at maximum

Input level control range: 20dB

Protection: RF interference, output current limiting, over temperature,
turn-on/off transient, subsonic filter, internal mains fuse

Indicators: Combination Power ON / Clip LED indicator

Power Requirements: Factory programmed for either 120V~ 60Hz,
220-240V~ 50/60Hz or 100V~ 50/60Hz, 100VA;
Power via detachable 3 circuit IEC type linecord

Cabinet: 5/8" vinyl laminated lock-mitered MDF

Dimensions: PS6: 8¼"W x 12½"H x 10"D

Weight: PS6: 23 lbs. each