tarjeta procesador SP 22 D

Vendo tarjetas de procesado para sistema de Etapas Qube, funcionan para todos los modelos PA de la marca
The digital controllers SP 22D and SP 22Ds (subwoofers) have been designed to optimise the overall performance through a dedicated equalisation of each individual speakers.
The SP22 D and SP 22 DS are 2-input / 2-output digital signal processors designed to optimize the performance of all QUBE loudspeakers. The SP 22 D, SP 22 DS processors are easily installed in a special plug in port located on the rear panel of a QUBE power amplifier. They can also be used with FBT or other manufacturers power amplifiers, by using the rack mountable QUBE HCR 12-22 (Host Controller Rack), which provides plug in ports for two SP 22 controllers.
The QUBE Model SP 22 D is designed for use with 2-way full-range speakers: Q106, Q208, Q110, Q112, Q115, QM115 and QUBE Model SP 22 DS is designed for use with subwoofers: QS112, QS115, QS118, QS218.

Key Features:
• Frequency range equalization to optimize the frequency response and power response.
• High precision control of power delivered to loudspeakers by means of an amplifier output sensing function.
• Woofer Excursion Control
• High Pass Filtering
• Fast acting crossover roll off (steep slope)
• Delay setting on both channels to compensate for vertical misalignment
• General delay on both channels from 0.25 meter to 64 meters
• 4-position selector for 4 configuration modes: Stereo / Biamped / Bridged/ Parallel
• 2 XLR inputs
• 2 parallel XLR outputs
• 8 dipswitches to change delay settings on both channels
• 1 dipswitch (#1) for SUB/PHASE reversal selection: SUB mode activates the high pass filter when the SP 22 D is utilized to control satellite speaker(s). On the SP 22DS the PHASE mode inverts the phase providing (180degree rotation) to the subwoofer(s)
• 3 dipswitches (#2 / #3 / #4) to select the QUBE cabinet model (8 modele
http://www.fbt.it/ENG/QUBE/PRODOTTI/DIGITAL-CO/SP/SP-22-D---/

varios modelos y unidades disponibles