Terratec DMX 6 Fire 24/96

Tarjeta de sonido terratec dmx 6 fire 24/96.
Está en perfecto estado, muy poco usada.
Sonido perfecto.
Viene con su caja original, su documentación, embalajes y cd de instalación.

Gastos a cargo del comprador.

Brief Specifications
Card internal I/O: CD1, CD2, Aux, S/PDIF TTL, optional Digital Xtension module to replace supplied DMX 6Fire module.
Card external I/O: stereo line in, stereo Front, stereo Rear, and Centre/LFE outputs.
Drive I/O: line in/tape, phono in, line out, mic in, headphone out, co-axial S/PDIF in and out, Toslink optical S/PDIF in and out, MIDI
In and Out, internal Waveblaster connector.
Input gain control for all A-D converters: up to +18dB in 0.5dB steps, software-controlled.
3D Audio: supports two-speaker, four-speaker, Dolby 5.1, and headphones.
Supported 3D standards: DirectSound3D, Sensaura 3D, A3D 1.0/2.0 and EAX 1.0/2.0.
Mic input sensitivity: 9mV to 500mV.
Phono input sensitivity: 5mV/47k(omega)/1kHz.
A-D converters: 24-bit 64x oversampling (part of AK4524 chip).
D-A converters: 24-bit 128x oversampling (part of AK4524 chip).
Input dynamic range: 100dB (converters only).
Output dynamic range: 110dB (converters only).
Total harmonic distortion + noise: not stated.
Frequency response: not stated.
Supported bit depths: 8, 16, 20, and 24 (packed and unpacked).
Supported sample rates: 8kHz to 96kHz.
Digital I/O: up to 24-bit/96kHz; non-audio mode transmits AC3 and DTS streams.

Driver I/O Options
MME driver inputs: DMX 6Fire Wave (any single stereo input, or monitor mix).
MME driver outputs: DMX 6Fire Wave (stereo Front).
WDM driver inputs: DMX 6Fire Wave (any single stereo input, or monitor mix).
WDM driver outputs: DMX 6Fire Wave 1/2 (Front), DMX 6Fire Wave 3/4 (Rear), DMX 6Fire Wave 5/6 (Centre/LFE).
ASIO inputs: CD, Line, Phono/Mic, Digital and Mix.
ASIO outputs: Front, Rear, Centre and Digital.