(o cambio) Amplificador Crown D75 A

Hola,

Vendo un Crown D75A en muy buen estado. Revisado en febrero 2018. Lo he usado para levantar los Auratones y tiene potencia de sobra. Es un estándar en radios americanas, estudios etc y mucha gente lo recomienda incluso solo por su amplificador de cascos.

Es la versión americana. Lo uso con un step-down de 230 a 120 vac, pero no está incluido.

Se ven a menudo en eBay, pero más caros y sin tener en cuenta envíos + aduanas. Ya no se fabrica.

Lo dejo en 100 eur y acepto cambios.

Aquí podéis ver un combo Auratones + Crown (con un precio desorbitado, pero bueno...): https://funkyjunkfrance.com/monitoring/moniteurs-passifs/auratone-5c-pair-crown-d75-a-bundle.html

Saludos,
Javier


Especificaciones del fabricante:
• Signal-to-Noise Ratio (unweighted): 106 dB below full rated power from 20 Hz to 20 kHz.
• Input Impedance: 20 K ohms balanced, 10 K ohms unbalanced.
• Connectors: Inputs: Balanced three-pin Neutrik combination XLR and 1/4-in. phone jack for each channel.Output: Four-terminal barrier block (two per channel) and stereo headphone jack.AC Line: Standard three-wire grounded connector
• Controls: Power, channel 1 and 2 detented level controls, dual/mono jumper.
• Dimensions: 19 in. (48.3 cm) standard rack mount width, 1.75 in. (4.4 cm) height, 8.38 in. (21.6 cm) depth behind mounting surface.
• Net Weight: D-75A: 9 lbs. 7 oz. (4.3 kg).
• Total Harmonic Distortion (THD): Less than 0.001% from 20 Hz to 400 Hz and increasing linearly to 0.05% at 20 kHz delivering rated power into 8 ohms/channel.
• Intermodulation Distortion (IMD): (60 Hz and 7 kHz 4:1) Less than 0.05% from 0.01 to 0.25 watt and less than 0.01% from 0.25 watts to rated power into 8 ohms/channel.
• Load Impedance: Rated for 4 to 16 ohms in Stereo and 8 to 16 ohms in Bridge-Mono. Safe with all types of loads.
• Output Power per Channel in Stereo Mode with Both Channels Driven:
• FTC Continuous Average Power from 20 Hz to 20 kHz with No More than 0.1% THD:
• D-75A: 35 watts into 8 ohms, 45 watts into 4 ohms.
• Maximum Average Power at 1 kHz with No More than 0.1% THD:D-45: 20 watts into 16 ohms, 25 watts into 8 ohms, 35 watts into 4 ohms.D-75A: 25 watts into 16 ohms, 40 watts into 8 ohms, 55 watts into 4 ohms.
• Output Power in Bridge-Mono Mode: Maximum Average Power at 1 kHz with No More than 0.1% THD:D-45: 70 watts into 8 ohms.D-75A: 110 watts into 8 ohms.