Mesa Digital Roland m200i con Flight Case

Vendo mesa digital Roland m200i en perfecto estado con flight case a medida.

La mesa Roland M-200i es parte de la familia V-Mixer lo que significa que tiene una calidad de sonido, un funcionamiento y una capacidad de expansión excelente, todo condensado en un cuerpo compacto. Es un V-Mixer con 24 entradas analógicas, 12 salidas analógicas y salida digital estéreo (AES / EBU), todas integradas en la unidad principal.
Está pensada para uso con un iPad pero funciona también sin él.
Incluyo flight case a medida de madera de muy buena calidad encargado a SwanFlight.com, adaptador WLAN para la propia mesa y Router.
Os pego las especificaciones y os remito a la página de Roland para que consultéis cualquier duda.

https://proav.roland.com/global/products/m-200i/specifications/

PROCESSINGChannels/BusesCHANNELS: 32BUSES: MAIN L/R, 8 AUX, 4 MATRIXInputs/OutputsINPUTS: 24 (64 when using optional REAC devices)OUTPUTS: 14 (Max 54 ports when using REAC Devices)Signal ProcessingAD/DA Conversion: 24 bitSample Rate: 48.0 kHz or 44.1 kHzConsole Latency2.0 mS (typ.) *1* Total Latency of audio signal from M-200i's console inputs to M-200i's outputs.* Sample Rate: 48.0 kHz * Effects: No insert effectsNetwork Latency2.5 mS (typ.) *1* Total System Latency of audio signal from S-1608 inputs to outputs via M-200i's REAC ports.* Sample Rate: 48.0 kHz* Effects: No insert effectsCONNECTORSInputs/Outputs/OthersINPUT jacks (1 to 16): XLR-3-31 type (balanced, phantom power)INPUT jacks (17 to 22): 1/4 inch Phone type (balanced)INPUT jacks (23 to 24): RCA Phono typeASSIGNABLE OUTPUT jacks (1 to 6): XLR-3-32 type (balanced)ASSIGNABLE OUTPUT jacks (7 to 10): 1/4 inch Phone type (balanced)MAIN OUTPUT jacks (L, R): XLR-3-32 type (balanced)PHONES jack: Stereo 1/4 inch phone type, Miniature phone typeAES/EBU OUT jacks: XLR-3-32 type (110 ohm balanced)REAC port: RJ-45 EtherCon typeRS-232C connector: 9-pin D-sub typeMIDI connectors (OUT/THRU, IN): 5-pin DIN typeUSB MEMORY port: USB Type AUSB WLAN ADAPTOR port: USB Type AUSB COMPUTER port: USB Type BLAN port: RJ45 typeDOC CABLE port : 10-pin mini DIN typeDOC CABLE port : 10-pin mini DIN type DC IN jackGrounding terminal* XLR type: 1 GND, 2 HOT, 3: COLD* Phantom power: DC+48V (unloaded maximum), 14mA (maximum load, All XLR type inputs)INPUT/OUTPUT CHARACTERISTICSFrequency ResponseASSIGNABLE OUTPUT jacks (1 to 10): -2 dB / +0 dB (20k ohms load, +4 dBu, typ.)MAIN OUTPUT jacks (L, R): -2 dB / +0 dB (20k ohms load, +4 dBu, typ.)PHONES jack: -3 dB / +0 dB (40 ohms load, 150 mW, typ.)* Sample Rate: 48.0 kHz or 44.1 kHz* Input Connector: INPUT 1 to 24 (Pad: ON, Input sens: +4 dBu, 20 Hz to 20 kHzTotal Harmonic Distortion + NoiseASSIGNABLE OUTPUT jacks (1 to 10): 0.05 % (+4 dBu, typ.)MAIN OUTPUT jacks (L, R): 0.05 % (+4 dBu, typ.)PHONES jack: 0.05 % (40 ohms load, 150 mW, typ.)* Sample Rate: 48.0 kHz or 44.1 kHz* Input Connector: INPUT 1 to 24 (Input sens: +4 dBu, 20 Hz to 20 kHz)Dynamic RangeASSIGNABLE OUTPUT jacks (1 to 10): 102 dB (typ.)MAIN OUTPUT jacks (L, R): 102 dB (typ.)* Sample Rate: 48.0 kHz or 44.1 kHz* Input Connector: INPUT 1 to 24 (Input sens: +4 dBu, 20 Hz to 20 kHz)Crosstalk@ 1 kHzINPUT jacks (1 to 24): -80dB (Input sens: +4 dBu, IHF-A, typ.)ASSIGNABLE OUTPUT jacks (1 to 10): -88 dB (typ.)MAIN OUTPUT jacks (L, R): -88 dB (typ.)* Sample Rate: 48.0 kHz or 44.1 kHzNominal Input Level (Variable)INPUT jacks (1 to 16): -65 to +4 dBuINPUT jacks (17 to 24): -28 to +4 dBuInput ImpedanceINPUT jacks (1 to 16): 14 k ohmsINPUT jacks (17 to 24): 10 k ohmsNon Clip Maximum Input levelINPUT jacks (1 to 24): +22dBu (1 kHz, 20 k ohms load, typ.)Nominal Output LevelASSIGNABLE OUTPUT jacks (1 to 10): +4 dBu (Load impedance: 10 k ohms, typ.)MAIN OUTPUT jacks (L, R): +4 dBu (Load impedance: 10 k ohms, typ.)Output ImpedanceASSIGNABLE OUTPUT jacks (1 to 10): 600 ohms (typ.)MAIN OUTPUT jacks (L, R): 600 ohms (typ.)PHONES jack: 49 ohms (typ.)Recommended Load ImpedanceASSIGNABLE OUTPUT jacks (1 to 10): 10 k ohms or greaterMAIN OUTPUT jacks (L, R): 10 k ohms or greaterPHONES jack: 40 ohms or greaterMinimum Load ImpedancePHONES jack: 16 ohmsNon Clip Maximum Output levelASSIGNABLE OUTPUT jacks (1 to 10): +22 dBu (1 kHz, 10 k ohms load, typ.)MAIN OUTPUT jacks (1 to 10): +22 dBu (1 kHz, 10 k ohms load, typ.)PHONES jack: 150 mW + 150 mW (1 kHz, 40 ohms load, typ.)Residual Noise Level (IHF-A, typ.)-88 dBu (All faders: Min)-80 dBu (Main Fader: Unity, Channel faders: Unity only one INPUT1 channel, Preamp sens: Min)-61 dBu (Main Fader: Unity, Channel faders: Unity only one INPUT1 channel, Preamp sens: Max)* Input 150 ohms terminate* Output Connector: ASSIGNABLE OUTPUT jacks (1 to 10), MAIN OUTPUT jacks (L, R)* Sample Rate: 48.0 kHz or 44.1 kHzEquivalent Input Noise Level (E.I.N.)-126 dBu (Main Fader: Unity, Channel faders: Unity only one channel, Preamp sens: Max)* Output Connector: ASSIGNABLE OUTPUT jacks (1 to 10), MAIN OUTPUT jacks (L, R)