SPL Gainstation 1 AD
Por buendiainside el 18/10/2016 en Pontevedra
Expiración: 03/04/2017 | Visto 515 veces
730€
Este anuncio ha expirado.
Otros anuncios que te pueden interesar
-
Rode Ntk Micrófono de valvula en Toledo350 €
-
Audient Black 2 Compresores + 1 previo + 1 EQ en Pontevedra900 €
-
630 €
-
LD Systems SAT 62 A G2 en Madrid229 €
-
Micrófono Audiotechnica AT4033 en Alicante295 €
Muy a mi pesar, pongo en venta este gran previo. Es el modelo con convertidor AD.
No es necesario que exponga sus características pero dejo el enlace de thomann para los interesados:
https://www.thomann.de/es/spl_gainstation_1_ad.htm
El aparato se encuentra en perfecto estado estético y de funcionamiento y no tiene marcas de uso. Está como nuevo y muy bien cuidado.
Incluyo el envío en el precio
------
Comentar un detalle para dejar constancia ante cualquier duda: El potenciómetro Tube Gain tiene un recorrido previo antes de conectar la válvula. Una vez que ésta entra, la misma unidad hace un "crackling sound" que desaparece al pasar ese punto de conexión.
Nada que ver con pote sucio o falla del aparato y que no afecta para nada al funcionamiento del previo. Quiero que quede claro: viene de fábrica y, de forma aleatoria, algunas unidades lo tienen y otras no.
La explicación es la siguiente, recogida de un foro que habla precisamente del tema.
Mic pre pots usually have an electrolytic capacitor in series with the potentiometer. The whole reason for this capacitor: to block DC voltage and prevent crackling when you turn the knob.
My guess is that SPL did not use this cap. Because it does technically give you higher fidelity since you're not sending signal through an electrolytic cap. The trade off is you might have a crackly pot. I know super hifi tech guys who've removed all the mic pre gain caps from their consoles. Yeah, sometimes the gain pots crackle when you turn them, but you don't turn them while you're recording; and the increase in signal fidelity is worth it to them. And if SPL considers the crackling normal, I'd say this is why. As long as the crackling only happens when you turn the knob, then there's nothing wrong with your SPL unit.
Circuit design is ALWAYS a compromise between ideals and reality. You want better sonics and a crackly pot, or do you want to not have a crackly pot and potentially negatively impact your signal in a small way by running your signal through one more electrolytic?
Cada uno que valore el balance entre preferencias personales y practicidad del propio aparato.
Un saludo!
No es necesario que exponga sus características pero dejo el enlace de thomann para los interesados:
https://www.thomann.de/es/spl_gainstation_1_ad.htm
El aparato se encuentra en perfecto estado estético y de funcionamiento y no tiene marcas de uso. Está como nuevo y muy bien cuidado.
Incluyo el envío en el precio
------
Comentar un detalle para dejar constancia ante cualquier duda: El potenciómetro Tube Gain tiene un recorrido previo antes de conectar la válvula. Una vez que ésta entra, la misma unidad hace un "crackling sound" que desaparece al pasar ese punto de conexión.
Nada que ver con pote sucio o falla del aparato y que no afecta para nada al funcionamiento del previo. Quiero que quede claro: viene de fábrica y, de forma aleatoria, algunas unidades lo tienen y otras no.
La explicación es la siguiente, recogida de un foro que habla precisamente del tema.
Mic pre pots usually have an electrolytic capacitor in series with the potentiometer. The whole reason for this capacitor: to block DC voltage and prevent crackling when you turn the knob.
My guess is that SPL did not use this cap. Because it does technically give you higher fidelity since you're not sending signal through an electrolytic cap. The trade off is you might have a crackly pot. I know super hifi tech guys who've removed all the mic pre gain caps from their consoles. Yeah, sometimes the gain pots crackle when you turn them, but you don't turn them while you're recording; and the increase in signal fidelity is worth it to them. And if SPL considers the crackling normal, I'd say this is why. As long as the crackling only happens when you turn the knob, then there's nothing wrong with your SPL unit.
Circuit design is ALWAYS a compromise between ideals and reality. You want better sonics and a crackly pot, or do you want to not have a crackly pot and potentially negatively impact your signal in a small way by running your signal through one more electrolytic?
Cada uno que valore el balance entre preferencias personales y practicidad del propio aparato.
Un saludo!
OfertasVer todas
-
beyerdynamic DT-770 Pro138 €Ver oferta
-
-21%Zoom H4n Pro Black158 €Ver oferta
-
-26%AKAI MPC Key 611.290 €Ver oferta
Usuario
Registrado 21/04/2011
Comentarios10
Temas4
Posts en foros178
Seguidores7
Mercasonic Score