Cambio: ¡¡¡ DOS INCREIBLES ECUALIZADORES NEUMANN W492 !!!

Cambio estos dos ecualizadores Neumann calibrados para mastering y con true bypass, sonido increible, estan montados en un rack hecho en Alemania de alta calidad, con todas las inscripciones, logotipo corporativo y demas, grabado a laser.
Cambio por compresor estereo.
Los valoro en 1200 Euros.
Aqui se explica muy bien, tanto su historia, como el diseño, el sonido y las caracteristicas de estos ecualizadores.


History:

The Neumann W492 was build in the mid of the 1980´s. It was specially designed for live purposes and is one of the few danner cassette modules with continous variable controls. Other than most of the danner cassettes the Neumann W492 equalizer has hi-quality potentiometers instead of the common rotary switches inside. Neumann follows a long tradition of fine vintage German mixer modules, so all circuitry for the Neumann W492’s is high quality and build after the standards of the IRT (Institut für Rundfunk Technik). In the beginning these modules were built for radio stations exclusively due to their high factory price. Years later they found their way into recording studios around the world as used and now affordable gear.

Design:

The idea behind the Neumann W492 equalizer was to build a eq module for live purposes, where the sound engineer often needs to change the eq settings. The five Filters of the Neumann W492 can be switched on and off separatley and the whole filter section can be bypassed with the bypass switch. Due to this feature and the continous variable controls, the W492 can be adjusted very smoothly while the audio signal is audibly without causing unwanted level jumps. The downside of the continous variable controls is the lack of „recallability“, so the Neumann W492 might not be the first choice when looking for a stem or bus eq suitable for stereo signals.

Sound:

The W492b is a flexible eq with a relatively clean and soft character. Thanks to it´s five independent bands and continous variable controls, the Neumann W492 can be called the most flexible danner cassette eq. You can give any signal anything from slight coloration to wild EQ-ing effects. The Neumann Sound will always be there without destroying your signal. Nice tool!

Features:

- Transformer balanced input

- Balanced output
- 5-band EQ with bypass of each band or the whole filter section.

- Filter 1: Hipass filter 18dB/okt. | cut-off frequency selectable 20Hz/80Hz/140Hz

- Filter 2: Shelving ±15dB | 50Hz...400Hz | continous variable

- Filter 3: Glockenfilter mit 2Okt. Bandbreite | ±15dB | 63Hz...1kHz continous variable

- Filter 4: Glockenfilter mit 2Okt. Bandbreite | ±15dB | 1kHz...16kHz continous variable

- Filter 5: Shelving ±15dB | 3kHz...10kHz

- Extremely wide frequency response beyond 50 kHz

- Low distortion & noise floor