etapa crown xls 602 1200 w
Por raikkonen1 el 26/02/2015 en Baleares
Expiración: 04/05/2015 | Visto 224 veces
150€
El anuncio ha sido retirado.
Otros anuncios que te pueden interesar
-
Crown Xls 602 Etapa en Barcelona170 €
-
Etapa Crown CPS 2000 nueva en Huesca1000 €
-
subgraves woofer 18 pulgadas y etapa crown en Ciudad Real3200 €
-
9000 €
-
RACK NEXO CAMCO KIND en Valencia1950 €
vendo etapa crown xls 602 1200 w regalo flight case de 2 unidades
Crown XLS 602
Amplificador profesional
Minimum Guaranteed Power:
per channel, both channels driven
1 kHz with 0.5% THD
◦Stereo, 2 ohms (per ch.): ---
◦Stereo, 4 ohms (per ch.): 600 Watts
◦Stereo, 8 ohms (per ch.): 380 Watts
◦Bridge-Mono, 8 ohms: 1200 Watts
◦Bridge-Mono, 4 ohms: ---
Features :
◦Reliable design incorporates many popular features
◦Housed in a rugged, all-steel 2U chassis
◦Efficient forced-air fans prevent excessive thermal buildup
◦Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
◦Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
◦Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Specifications:
◦Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25
◦Frequency Response (at 1 watt, 22 Hz - 20 kHz): +0 dB, –1 dB
◦Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power: > 100 dB
◦Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) No weighting, below rated power: > 95 dB
◦Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz: < 0.5%
◦Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB: < 0.3%
◦Damping Factor (8 ohm): 10 Hz to 400 Hz: > 200
◦Crosstalk (below rated power) at 1 kHz: –75 dB
◦Crosstalk (below rated power) at 20 kHz: –50 dB
◦Input Impedance (nominal) (balanced, unbalanced): 20 kilohms, 10 kilohms
◦Load impedance Stereo: 4-8 ohms
◦Load impedance Bridge mono: 8 ohms
◦AC Line Voltage and Frequency Configurations Available (± 10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, 230-240 VAC 50 Hz
◦Ventilation: Flow-through ventilation from front to back
◦Cooling Internal heat sinks with forced-air cooling
◦Air Volume Requirements (per minute per unit) : 80.15 ft3 (2.27 m3)
cambio por material para guitarras
Crown XLS 602
Amplificador profesional
Minimum Guaranteed Power:
per channel, both channels driven
1 kHz with 0.5% THD
◦Stereo, 2 ohms (per ch.): ---
◦Stereo, 4 ohms (per ch.): 600 Watts
◦Stereo, 8 ohms (per ch.): 380 Watts
◦Bridge-Mono, 8 ohms: 1200 Watts
◦Bridge-Mono, 4 ohms: ---
Features :
◦Reliable design incorporates many popular features
◦Housed in a rugged, all-steel 2U chassis
◦Efficient forced-air fans prevent excessive thermal buildup
◦Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
◦Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
◦Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Specifications:
◦Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25
◦Frequency Response (at 1 watt, 22 Hz - 20 kHz): +0 dB, –1 dB
◦Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power: > 100 dB
◦Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) No weighting, below rated power: > 95 dB
◦Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz: < 0.5%
◦Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB: < 0.3%
◦Damping Factor (8 ohm): 10 Hz to 400 Hz: > 200
◦Crosstalk (below rated power) at 1 kHz: –75 dB
◦Crosstalk (below rated power) at 20 kHz: –50 dB
◦Input Impedance (nominal) (balanced, unbalanced): 20 kilohms, 10 kilohms
◦Load impedance Stereo: 4-8 ohms
◦Load impedance Bridge mono: 8 ohms
◦AC Line Voltage and Frequency Configurations Available (± 10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, 230-240 VAC 50 Hz
◦Ventilation: Flow-through ventilation from front to back
◦Cooling Internal heat sinks with forced-air cooling
◦Air Volume Requirements (per minute per unit) : 80.15 ft3 (2.27 m3)
cambio por material para guitarras
OfertasVer todas
-
-26%AKAI MPC Key 611.290 €Ver oferta
-
beyerdynamic DT-770 Pro138 €Ver oferta
-
-8%Behringer X Air XR18645 €Ver oferta
Usuario
Registrado 17/03/2012
Comentarios3
Seguidores2
Mercasonic Score