Mesa de mezclas Yamaha 24/12

Mesa de mezclas Yamaha 24/12 con 24 canales (20 mono más 2 estéreo) y 12 salidas de mezcla independientes. Su sistema Matrix hace muy fácil el enrutado. Perfecta tanto para directos como para sonorización de locales.

Estado muy bueno. Tiene un pequeño golpe/roce en la parte superior y un arañazo en la trasera, que he resaltado en las últimas fotos que no afectan en nada a su funcionamiento. Funcionalmente está genial y lo único que no va del todo bien es el envío 1 del canal 1 que tiene un nivel muy bajo de señal. Lo demás va bien. No tiene ruidos ni rasca ningún potenciómetro.

En principio es entrega local porque es bastante grande y no tengo flightcase para protegerla adecuadamente en el transporte, y sobre todo porque así se puede ver y probar perfectamente.

Copio del manual (en inglés):
The GA24/12 provides 20 mono-aural and 2 stereo input modules. The output channels comprise stereo outputs, 10 mix out- puts, and two matrix outputs, and support a wide range of applications, from SR (sound reinforcement) to facility acoustics.
• Each monaural input channel offers a 26 dB pad, HPF, phase switch, 4-band EQ (HI-MID and LO- MID frequencies are variable), and a 100 mm- long full-stroke fader. Also, phantom power can be turned on and off for every group of four inputs.
• Four stereo AUX returns and TAPE IN jacks are provided as standard.
• The master section of the console is located in the center area of the unit, facilitating operation.
• The master section provides output channels for MIX buses 1–10, with EQs and 100 mm-long faders.
• Each input channel and four stereo AUX returns include a PFL switch, and stereo bus, MIX buses 1–10, and Matrix 1–2 has an AFL switch, enabling you to monitor the input/output sources quickly.
• Using the GA Diversity function enables you to set MIX buses 1–4 to Variable mode or Fix mode individually. In Variable mode, you can change the level of the signals sent out from the input channels. This routing can be used as a conventional AUX bus. In Fix mode, the level of the signals sent out from the input channels is fixed.
This routing can be used as a conventional group bus. In this way, you can configure the bus for a specific purpose.
The console has two independent matrixes. You can mix MIX buses 1–4 and the stereo bus indi- vidually at the levels you desire and output them from the MATRIX OUT 1–2 jacks. This routing can be used as a mix for the foldback or for indi- vidual speakers and amplifiers.
The INSERT I/O jacks are provided for all monaural input channels, the stereo bus, and MIX buses 1–4. You can insert an external effect processor, if necessary.
Talkback signals can be sent to any of MIX buses 1–4, MIX buses 5–10, and the stereo bus.
C-R monitor output enables you to select PFL/ AFL or TAPE IN as a monitoring source.
The console’s sturdy finish and rugged design assure its durability even under severe conditions and rough on-site usage.