Micrófono de condensador Audio-Technica AT871UG
ivanmas
Barcelona
el 22/01/2021
40€
Este anuncio ha expirado.
Otros anuncios que te pueden interesar
-
450 €
-
250 €
-
AUDIO TECHNICA AT8533X en Huesca29 €
-
AUDIO TECHNICA AT854R en Huesca205 €
-
AUDIO TECHNICA AT8614 en Huesca22 €
Micrófono de condensador audio Technica AT871UG. Montaje en pared. Usado pero en buen estado. Sin cables.
Designed for surface-mount applications such as high-quality sound reinforcement, professionalrecording, television, conferencing and other demanding sound pickup situations.
UniGuardTM RFI-shielding technology offers outstanding rejection of radio frequencyinterference(RFI).
Superior off-axis rejection for maximum gain before feedback.
Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance.
Heavy die-cast case and non-silp silicon foam bottom pads minimize coupling of surface vibration to the microphone.
Low-profile design with low-reflectance finish for minimum visibility.
AT871UG has contained electronics eliminate need for external power module.
The AT871UG requires 9V to 52V phantom power for operation only.
Fixed-charge back plate, permanently polarized condenser
Polar Pattern
Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response
30-20,000 Hz
Open Circuit Sensitivity
-34 dB(19.9mV) re 1V at 1Pa
Impedance
200 ohms
Maximum Input Sound Level
133 dB SPL (1KHz,THD 1%)
Dynamic Range (Typical)
103 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio
67 dB, 1 kHz at 1Pa
Designed for surface-mount applications such as high-quality sound reinforcement, professionalrecording, television, conferencing and other demanding sound pickup situations.
UniGuardTM RFI-shielding technology offers outstanding rejection of radio frequencyinterference(RFI).
Superior off-axis rejection for maximum gain before feedback.
Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance.
Heavy die-cast case and non-silp silicon foam bottom pads minimize coupling of surface vibration to the microphone.
Low-profile design with low-reflectance finish for minimum visibility.
AT871UG has contained electronics eliminate need for external power module.
The AT871UG requires 9V to 52V phantom power for operation only.
Fixed-charge back plate, permanently polarized condenser
Polar Pattern
Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response
30-20,000 Hz
Open Circuit Sensitivity
-34 dB(19.9mV) re 1V at 1Pa
Impedance
200 ohms
Maximum Input Sound Level
133 dB SPL (1KHz,THD 1%)
Dynamic Range (Typical)
103 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio
67 dB, 1 kHz at 1Pa
Características declaradas por el vendedor
Estado: Bueno
OfertasVer todas
-
GForce OB-X125 €Ver oferta
-
-37%Behringer SU992069 €Ver oferta
-
-28%Palmer Monicon L129 €Ver oferta
Usuario
Registrado 24/10/2011