Monitor de estudio autoamplificado TAPCO S8
Por franjvn el 12/06/2018 en Sevilla
Expiración: 11/08/2018 | Visto 421 veces
65€
Este anuncio ha expirado.
Otros anuncios que te pueden interesar
-
ADAM A3X Monitor de estudio en Barcelona160 €
-
700 €
-
Subwoofer Dynaudio BM9Sll en Barcelona390 €
-
Altavoz Monitor Hughes & Kettner 12/2 en Madrid100 €
-
250 €
Se vende monitor autoamplificado de la marca TAPCO (Mackie) en perfecto estado, sólo marcas estéticas superficiales.
Precio negociable.
Features:
Mackie-designed active desktop monitors with dual high-precision internal amplifiers (60w x 60w)
8-inch woofer delivers big, punchy low-end especially suited to modern rock, hip-hop, dance music production
1-inch waveguide-loaded silk dome tweeter with exceptional stereo imaging for smooth, non-fatiguing mix sessions
Low-Freqency Boost and High-Frequency - Boost/Cut controls allow for acoustic tailoring to different rooms
Balanced TRS/XLR and unbalanced RCA inputs
Magnetically shielded, can be placed next to your CRT monitor
Outperforms other 8" active monitors in its class
SPECIFICATIONS
Acoustic Performance
Free Field Frequency Response: 40 Hz 20 kHz (±3 dB)
Lower Cutoff Frequency: -3 dB @ 40 Hz
Upper Cutoff Frequency: -3 dB @ 20 kHz
Sound Pressure Level @ 1 meter, 7.5 dBu into Balanced Input: 100 dB SPL @ 1m
Maximum SPL Per Pair: 113 dB SPL @ 1m
Transducers
Low Frequency: 8 in/203 mm with steel frame, polypropylene cone woofer
High Frequency: Wave guide loaded 1 in/25 mm silk dome tweeter
Amplifiers
Low Frequency Power: 60 watts, 4-ohm load, 100 watts peak
High Frequency Power: 60 watts, 4-ohm load, 100 watts peak
Slew Rate: > 15 V/microsecond
Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
Signal-to-Noise Ratio:
Low Frequency: > 101 dB, 20 Hz to 20 kHz, unweighted, referenced to 60 watts into 4 ohms
High Frequency: > 93 dB, 20 Hz to 20 kHz, unweighted, referenced to 60 watts into 4 ohms
Type: Monolithic IC, Class AB
Electronic Crossover
Crossover Type: 24 dB/octave
Crossover Frequency: 3 kHz
Sensitivity: +4 dBu at 300 Hz for full output
Input Impedance: 20 kOhms, balanced bridging; 10 kOhms unbalanced
Equalization
Low Frequency EQ: +2 dB/+4 dB @ 100 Hz, peaking
High Frequency EQ: ±2 dB @ 5 kHz, shelving
AC Power Requirements
US: 120 VAC, 60 Hz
Europe: 240 VAC, 50 Hz
Korea (AC Power Select at 240 V): 220 VAC, 60 Hz
Japan (AC Power Select at 120 V): 100 VAC, 50/60 Hz
AC Connector: 2-pin IEC 250 VAC, 16 A male
Fuse: 115 VAC: T 1.6 A H/250 V
230 VAC: T 800 mA H/250 V
Power Consumption: 80 watts with music, loud mix
20 watts quiescent (idle)
Dimensions
Enclosure: 0.625" (16mm) thick MDF with 1" (25mm) MDF front panel
Damping: Adiabatic fiberfill
16.2"H x 11.6"W x 13.8"D (411x295x351mm)
Weight: 35.2 lbs. (16 kg)
Precio negociable.
Features:
Mackie-designed active desktop monitors with dual high-precision internal amplifiers (60w x 60w)
8-inch woofer delivers big, punchy low-end especially suited to modern rock, hip-hop, dance music production
1-inch waveguide-loaded silk dome tweeter with exceptional stereo imaging for smooth, non-fatiguing mix sessions
Low-Freqency Boost and High-Frequency - Boost/Cut controls allow for acoustic tailoring to different rooms
Balanced TRS/XLR and unbalanced RCA inputs
Magnetically shielded, can be placed next to your CRT monitor
Outperforms other 8" active monitors in its class
SPECIFICATIONS
Acoustic Performance
Free Field Frequency Response: 40 Hz 20 kHz (±3 dB)
Lower Cutoff Frequency: -3 dB @ 40 Hz
Upper Cutoff Frequency: -3 dB @ 20 kHz
Sound Pressure Level @ 1 meter, 7.5 dBu into Balanced Input: 100 dB SPL @ 1m
Maximum SPL Per Pair: 113 dB SPL @ 1m
Transducers
Low Frequency: 8 in/203 mm with steel frame, polypropylene cone woofer
High Frequency: Wave guide loaded 1 in/25 mm silk dome tweeter
Amplifiers
Low Frequency Power: 60 watts, 4-ohm load, 100 watts peak
High Frequency Power: 60 watts, 4-ohm load, 100 watts peak
Slew Rate: > 15 V/microsecond
Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
Signal-to-Noise Ratio:
Low Frequency: > 101 dB, 20 Hz to 20 kHz, unweighted, referenced to 60 watts into 4 ohms
High Frequency: > 93 dB, 20 Hz to 20 kHz, unweighted, referenced to 60 watts into 4 ohms
Type: Monolithic IC, Class AB
Electronic Crossover
Crossover Type: 24 dB/octave
Crossover Frequency: 3 kHz
Sensitivity: +4 dBu at 300 Hz for full output
Input Impedance: 20 kOhms, balanced bridging; 10 kOhms unbalanced
Equalization
Low Frequency EQ: +2 dB/+4 dB @ 100 Hz, peaking
High Frequency EQ: ±2 dB @ 5 kHz, shelving
AC Power Requirements
US: 120 VAC, 60 Hz
Europe: 240 VAC, 50 Hz
Korea (AC Power Select at 240 V): 220 VAC, 60 Hz
Japan (AC Power Select at 120 V): 100 VAC, 50/60 Hz
AC Connector: 2-pin IEC 250 VAC, 16 A male
Fuse: 115 VAC: T 1.6 A H/250 V
230 VAC: T 800 mA H/250 V
Power Consumption: 80 watts with music, loud mix
20 watts quiescent (idle)
Dimensions
Enclosure: 0.625" (16mm) thick MDF with 1" (25mm) MDF front panel
Damping: Adiabatic fiberfill
16.2"H x 11.6"W x 13.8"D (411x295x351mm)
Weight: 35.2 lbs. (16 kg)
Usuario
Registrado 23/11/2005
Comentarios2
Posts en foros239
Seguidores1
Mercasonic Score