Previo a válvulas Electro Harmonix nuevo para voz & guitarra
Por franpa el 25/09/2020 en Alicante
Expiración: 21/11/2021 | Visto 1535 veces
250€
El usuario ha marcado este anuncio como vendido
Otros anuncios que te pueden interesar
-
Previo de valvulas TL-Audio Ivory 2 5001 en Zaragoza400 €
-
Vendo previo válvulas SoundSkulptor Mp566 en Navarra540 €
-
Electro Harmonix POG 2 en Cáceres249 €
-
Electro Voice bpu-2 re2. en Huesca72 €
-
Audient Black 2 Compresores + 1 previo + 1 EQ en Pontevedra900 €
Preamplificador de micrófono 12AY7 de Electro Harmonix a válvulas made in USA. Profesional Clase A. Tono cálido y excelente precisión. Doble rendimiento de tubo de vacío. Balanceada XLR In & Out. Para voz y guitarra acústica. Nuevo sin estrenar en su caja, con manuales y transformador. Descatalogado.
https://www.youtube.com/watch?v=a4k__at0RdI
Class A Tube Microphone Preamp for vocals and guitars discontinued, unused, made in USA, with transformer & in original box.
With the Electro-Harmonix 12AY7 Tube Microphone Preamp, Electro-Harmonix offers an affordable tube microphone preamp that won't disappoint. Equipped with a 12AY7 EH tube and a 12AU7 EH driver, it gives microphones the widest dynamic range with the warmest possible tone and accuracy. The 12AY7 Mic Pre uses an actual 200V supply instead of the "faked out" 12 or 48 volts you'd get with common models and delivers 50dB of gain into a high impedance load or 40dB gain into 600 ohms.
The 12AY7 Mic Preamp's special FET current-balancing circuit allows the tubes to amplify the microphone signal to line level while eliminating noise and protecting against hum and hostile electrical environments. It has an extra TRS output for separate line control, which can be used as a splitter or an aux send for monitoring. Input connections are balanced in and out (XLR) with a 1/4" TRS balanced buffer out. The Electro-Harmonix mic pre unit also boasts a phase reverse switch and a +4dBm indicator light for setting optimal mic level. The 48V phantom power is soft starting and pop-free.
Electro-Harmonix 12AY7 Tube Microphone Preamp Features:
- Equipped with a 12AY7 EH tube and a 12AU7 EH driver
- Wide dynamic range, warm tone, and superb accuracy
- 50dB of gain into high load, 40dB gain into 600 ohms
- FET current-balancing mic preamp circuitry eliminates noise and hum
- TRS output for separate line control (use as a splitter or for monitoring)
- Balanced XLR in and out
- 1/4" TRS balanced buffer out
- Phase reverse switch
- With +4dBm indicator light for setting optimal mic level
- With 48V phantom power with soft start
https://www.youtube.com/watch?v=a4k__at0RdI
Class A Tube Microphone Preamp for vocals and guitars discontinued, unused, made in USA, with transformer & in original box.
With the Electro-Harmonix 12AY7 Tube Microphone Preamp, Electro-Harmonix offers an affordable tube microphone preamp that won't disappoint. Equipped with a 12AY7 EH tube and a 12AU7 EH driver, it gives microphones the widest dynamic range with the warmest possible tone and accuracy. The 12AY7 Mic Pre uses an actual 200V supply instead of the "faked out" 12 or 48 volts you'd get with common models and delivers 50dB of gain into a high impedance load or 40dB gain into 600 ohms.
The 12AY7 Mic Preamp's special FET current-balancing circuit allows the tubes to amplify the microphone signal to line level while eliminating noise and protecting against hum and hostile electrical environments. It has an extra TRS output for separate line control, which can be used as a splitter or an aux send for monitoring. Input connections are balanced in and out (XLR) with a 1/4" TRS balanced buffer out. The Electro-Harmonix mic pre unit also boasts a phase reverse switch and a +4dBm indicator light for setting optimal mic level. The 48V phantom power is soft starting and pop-free.
Electro-Harmonix 12AY7 Tube Microphone Preamp Features:
- Equipped with a 12AY7 EH tube and a 12AU7 EH driver
- Wide dynamic range, warm tone, and superb accuracy
- 50dB of gain into high load, 40dB gain into 600 ohms
- FET current-balancing mic preamp circuitry eliminates noise and hum
- TRS output for separate line control (use as a splitter or for monitoring)
- Balanced XLR in and out
- 1/4" TRS balanced buffer out
- Phase reverse switch
- With +4dBm indicator light for setting optimal mic level
- With 48V phantom power with soft start
Características declaradas por el vendedor
Estado: Impecable
País de fabricación: Estados Unidos
Color: Plateado
Usuario
Registrado 26/02/2005
Comentarios3
Posts en foros1
Seguidores1
Mercasonic Score