Kenton Pro solo MK2 Midi/cv

Convertidor MIDI/CV en perfectas condiciones.


Recogida en Madrid o envío a cargo del comprador.

KENTON PRO SOLO MKII

The Kenton Pro Solo MKII builds upon the features of its predecessor to offer even more options along with greater ease-of-use. The MKII features thirty-six separate parameters and an updated interface. The display and selection system has been greatly improved, with the Select button doing most of the work.

The unit features a single MIDI IN, MIDI THRU, CV out (switchable between V/Oct and Hz/V), as well as gate and aux outs. There’s also an internal LFO that provides nine waveshapes, can modulate the pitch or aux outputs, and is able to be synchronized with the Pro Solo’s internal clock. Additionally, the MIDI clock can be translated into pulse streams useful for controlling drum machines, arpeggiators, or even sequencers.

PRO SOLO MKII FEATURES

Designed to control all types of mono-synth
Super-fast response time
Famous Kenton build quality
Rugged steel case
High specification 16 bit D/A converters for rock-steady pitches
Runs from standard 9 volt power supply, 2.1mm center positive (+)
MIDI IN socket
MIDI THRU socket can be switched to become DIN SYNC or AUX 2 & 3
Any MIDI channel can be selected
Switchable for V/oct & Hz/V & 1.2V/oct scaling systems
Fine tune & scale are software controllable
Transpose (coarse tune) - up & down 12 semitones
Adjustable pitchbend range
Programmable Gate V-trig (up to 15v) or S-trig (with or without pull-up)
Multiple and single trigger modes
Note priority selection - newest / lowest / highest
Old notes are remembered to facilitate trill effects and increase playability
Portamento - fixed rate or fixed time modes
Auto Portamento mode selectable (where legato playing turns on Portamento)
Portamento Controller is selectable
Programmable AUX 1 variable analogue output controllable by any MIDI controller
AUX 2 & 3 (if selected) are switch outputs giving +5V or zero, depending on controller value
Programmable LFO - 9 wave shapes inc. random
LFO can modulate pitch &/or AUX output
Separate Controllers for LFO to CV and LFO to AUX
LFO can be synchronised to MIDI clock
LFO sync point can be selected
Key-on can reset LFO
Aux1 output can output clock
Clock output can select from 1 to 12, 24, or 48 clocks per quarter note
All parameters are controllable in real-time by SysEx
Set-up are stored in non-volatile memory for easy recall
MIDI monitor mode - for easy MIDI troubleshooting
Power supply included - UK / EU / USA types available
What's new or different about the MkII?

Now runs from standard 9 volt power supply - centre positive
MIDI THRU socket can be switched to become DIN SYNC or AUX 2 & 3
Portamento - new fixed time mode as well as existing fixed rate
Auto Portamento mode selectable (where legato playing turns on Portamento)
LFO sync point can be selected
LFO to CV controller now has Min, Max and Reset values
LFO to Aux controller now has Min, Max and Reset values
Key-on can reset LFO
All parameters are controllable in real-time by SysEx
Aux1 output can output clock at 1 to 12, 24, or 48 clocks per quarter note
Din sync and clock can be used at the same time as CV and Gate outputs
Can control all 5 connections of a TB-303 5 Socket upgrade at the same time
Display now uses all three digits to display numbers
Box now an attractive cobalt blue colour