Spl Crimson

Spl Crimson

Crimson combines a USB interface with high-quality preamps and a separate, fully-featured monitor controller. You can play and play back, record and convert, control and listen with one single device. So all you essentially need for a truly professional recording setup is the Crimson and a DAW.

Features
Max. six recording and six playback channels
10 source connections, 20 monitoring channels
34V operational voltage for pro levels up to +22 dBu
Two discrete mic preamplifiers
Two instrument preamplifiers (Hi-Z, +22 dBu)
Two separate headphones amps
Connect and control two stereo speaker sets
Monitor mix from recording and DAW return paths
Individual artist monitoring signal, with talkback
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Hi-Speed USB 2.0 (480MBit/s)
24 bit audio processing
Sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz
Fixed master clock for lowest jitter
True 1:1 audio, no sample rate conversion or clock recovery
SPDIF and MIDI I/Os
––––––––––Windows XP/Vista/7/8 (32 and 64 bit)
Mac OS X 10.4 or higher
iPad/iPhone class compliant
Multi-application mode, simultaneous ASIO and/or WDM playback
Low-latency Mac OS X (ASIO-like) HAL plug-in driver
Low-latency Windows ASIO and WDM driver
Driver feedback synchronization to hardware clock
ASIO control panel for Windows and MUSB Audio Class 2.0 compliance (asynchronous mode)
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Made in Germany