Ya esta disponible el OS 2.10 para el mpc1000
AKAI MPC 1000 SOFTWARE RELEASE NOTES
Version: 2.10
Date: 1/20/06
New features/Changes:
1. Changed 'Discard' and 'Extract' behavior. *If you choose 'discard' or 'extract' on the [TRIM] page, it will use the range from start to end. *If you choose 'discard' or 'extract' on the [LOOP] page, it will use the range from loop to end.
2. [STEP EDIT] 'Auto Step Increment' function now follows timing correct swing % Settings.
3. Minor clarification in the 'user' default window. Prompt now reads as follow
Pressing DO IT will memorize
setups of this sequence as
default setup in .ALL file.
4. Windows system files are now hidden on the [SAVE] and [LOAD] pages. Deleting these files causes the system to crash or show a system error.
Bug fixes:
1. Fixed bug where user could not sample/resample the main output under certain conditions.
2. Fixed bug where saved program information does not reload the same way it was saved.
3. Fixed bug where tempo would slow when increasing tempo via data wheel.
4. Fixed bug where MPC1000 would send program #0 even though sequence was blank.
5. Fixed bug where record time changes when recording is discarded after pressing retry
6. Fixed bug where sequencer would crash, requiring reboot when entering [SEQ EDIT] mode while playing, after copying bars in [SEQ EDIT].
7. Fixed bug where 'timestretch' algorithm would produce CPU address error.
8. Fixed bug where Moving Q1 on 'L/OUT' mixer page changes PAN when switching to 'L/PAN' page
9. Fixed bug where 'Note erase' wouldn't work when [NOTE REPEAT] is on.
10. Fixed bug where [NUMERIC] wouldn't work correctly for 'sq' field.
11. Fixed bug where overwriting a sample when editing would overwrite the wrong sample.
12. Fixed bug where an extra midi note is sent in [SLIDER] page
13. Fixed bug where slider 'reset' would not work
14. Fixed bug where 'discard' would not function for the beginning of a sample
15. Fixed bug where the compressor would cause click / severe distortion
16. Fixed bug where [TRIM] - would play random audio when end is set shorter than loop point.
17. Fixed bug where there would be a hanging note in [SEQ EDIT] 'transpose' for MIDI type track assigned to internal program.
18. Fixed bug where [NEXT SEQ] function would cause sequences to skip beats when previous Sequence was stopped halfway on last playback
19. Fixed miscellaneous product mislabeling in the user interface.
Version: 2.0
Date: 11/17/05
New features/Changes:
1. Added delay effect
2. Added timestretch and pitch shift (offline)
3. Added ability to reverse samples
4. Added ability to slice samples and create patched phrases
5. Real-time modulation with Q-Link
6. Added Input thru
7. Added HDD support
8. Added Track velocity field on [MAIN] screen
9. Added ability to audition samples directly from CF and HD
10. Added ability to adjust trim points with Q-Link sliders
11. Added Mixer automation
12. Added LFOs
13. Added Velocity > Start and Velocity > Pitch modulation
14. Added 'delete' and 'silence' option for [TRIM] 'edit' window
15. Added ability to change sequences by external MIDI program change
16. Added [NOTE REPEAT] hold.
17. Added .snd file support
18. Added multiple edit of 'shift timing', 'velocity' and 'duration' at [SEQ EDIT] mode
19. Added tempo sync of 'flying pan' and 'Tremolo' effect
20. Added note range selection for 'View' field in [STEP EDIT] mode
21. Added a shortcut between [MIXER] and [EFFECT] mode
22. Added multiple pad selection in [MIXER] mode with shift button
23. Added sequence parameter 'copy'
24. Added program based Mono/Poly setup
25. Added specific event type selection in [ERASE] window
26. Added 'repeat' option for Footswitch
AKAI MPC 1000 SOFTWARE RELEASE NOTES
Version: 2.10
Date: 1/20/06
New features/Changes:
1. Changed 'Discard' and 'Extract' behavior. *If you choose 'discard' or 'extract' on the [TRIM] page, it will use the range from start to end. *If you choose 'discard' or 'extract' on the [LOOP] page, it will use the range from loop to end.
2. [STEP EDIT] 'Auto Step Increment' function now follows timing correct swing % Settings.
3. Minor clarification in the 'user' default window. Prompt now reads as follow
Pressing DO IT will memorize
setups of this sequence as
default setup in .ALL file.
4. Windows system files are now hidden on the [SAVE] and [LOAD] pages. Deleting these files causes the system to crash or show a system error.
Bug fixes:
1. Fixed bug where user could not sample/resample the main output under certain conditions.
2. Fixed bug where saved program information does not reload the same way it was saved.
3. Fixed bug where tempo would slow when increasing tempo via data wheel.
4. Fixed bug where MPC1000 would send program #0 even though sequence was blank.
5. Fixed bug where record time changes when recording is discarded after pressing retry
6. Fixed bug where sequencer would crash, requiring reboot when entering [SEQ EDIT] mode while playing, after copying bars in [SEQ EDIT].
7. Fixed bug where 'timestretch' algorithm would produce CPU address error.
8. Fixed bug where Moving Q1 on 'L/OUT' mixer page changes PAN when switching to 'L/PAN' page
9. Fixed bug where 'Note erase' wouldn't work when [NOTE REPEAT] is on.
10. Fixed bug where [NUMERIC] wouldn't work correctly for 'sq' field.
11. Fixed bug where overwriting a sample when editing would overwrite the wrong sample.
12. Fixed bug where an extra midi note is sent in [SLIDER] page
13. Fixed bug where slider 'reset' would not work
14. Fixed bug where 'discard' would not function for the beginning of a sample
15. Fixed bug where the compressor would cause click / severe distortion
16. Fixed bug where [TRIM] - would play random audio when end is set shorter than loop point.
17. Fixed bug where there would be a hanging note in [SEQ EDIT] 'transpose' for MIDI type track assigned to internal program.
18. Fixed bug where [NEXT SEQ] function would cause sequences to skip beats when previous Sequence was stopped halfway on last playback
19. Fixed miscellaneous product mislabeling in the user interface.
Version: 2.0
Date: 11/17/05
New features/Changes:
1. Added delay effect
2. Added timestretch and pitch shift (offline)
3. Added ability to reverse samples
4. Added ability to slice samples and create patched phrases
5. Real-time modulation with Q-Link
6. Added Input thru
7. Added HDD support
8. Added Track velocity field on [MAIN] screen
9. Added ability to audition samples directly from CF and HD
10. Added ability to adjust trim points with Q-Link sliders
11. Added Mixer automation
12. Added LFOs
13. Added Velocity > Start and Velocity > Pitch modulation
14. Added 'delete' and 'silence' option for [TRIM] 'edit' window
15. Added ability to change sequences by external MIDI program change
16. Added [NOTE REPEAT] hold.
17. Added .snd file support
18. Added multiple edit of 'shift timing', 'velocity' and 'duration' at [SEQ EDIT] mode
19. Added tempo sync of 'flying pan' and 'Tremolo' effect
20. Added note range selection for 'View' field in [STEP EDIT] mode
21. Added a shortcut between [MIXER] and [EFFECT] mode
22. Added multiple pad selection in [MIXER] mode with shift button
23. Added sequence parameter 'copy'
24. Added program based Mono/Poly setup
25. Added specific event type selection in [ERASE] window
26. Added 'repeat' option for Footswitch
