Buenas.
Después de mucho navegar y navegar por internet, leyendo y comprando. Me he decidido a comprar un par de estos altavoces, los DB TECHNOLOGIES CROMO 10+ o los ALTO PROFESIONAL TS-110A.
Los DB TECHNOLOGIES
TECHNICAL DATA
Speaker Type: 2-Way Active Speaker
ACOUSTICAL DATA
Frequency Response [-10dB]: 65 - 20.000 Hz
Frequency Response [+/- 3dB]: 70 - 19.000 Hz
Max SPL: 121 dB
HF: 1 "
Type HF: Compression driver
Directivity: 90/70 x 60 °
Horn: Asymmetrical CD Horn
LF: 10 "
AMPLIFIER
Amp Technology: Digipack™
Amp Class: Class D
Power PRG: 400 Watt
PROCESSOR
Controller: DSP 24bit/48kHz
System Presets: Flat, Processed
Limiter: Dual Active Peak, RMS, Thermal
INPUT
MECHANICS
Housing: Polyporpylen PP
Angles Up: Monitor use 43 °
Width: 320 mm (12.8 in)
Height: 508 mm (20.32 in)
Depth: 297 mm (11.88 in)
Weight: 12 kg (26.46 lbs)
y los ALTO
TECH INFORMATION
Transducer Low: 10" Woofer with 1.5" voice coil
Transducer High: Neodymium compression driver, 1” exit with 1” voice coil
Power Amplification: 600 Watts peak (470 W LF + 130 W HF), 300 Watts continuous (235 W LF + 65 W HF)
Frequency Range: (-10 dB): 53 Hz - 20 kHz
Frequency Response: (±3 dB): 70 Hz - 19 kHz
Maximum SPL @ 1m: 123 dB peak, 120 dB continuous
-6 dB Nominal Coverage: 80° / 100° x 60° nominal
Active Crossover: 2.5 kHz
Connectors: 2 x Mic / Line Female XLR - 1/4” combo inputs, 1 x Loop - Out Male XLR
Input Control: Line / Mic -∞ to +50 dB, Maximum input level +23 dBu , Input Impedance 15 kOhms
External Controls: Volume, Power switch with LED indicator, Clip/Limit LED, Ground Lift switch
Protection Features: Over-excursion, Thermal, Driver
AC Power: 100 VAC, or 110 – 120 VAC, or 220 - 240 VAC (50 / 60 Hz)
Enclosure: Trapezoidal, with floor monitor capability. Injection molded, polypropylene enclosure, with perforated steel grille
Mounting: Integrated pole-socket (36 mm dia.) One Handle, four M10 threaded sockets: 2 top, 2 bottom
Dimensions (WxLxH): 20.2in x 12.99in x 11.73in
Weight: 26.6 lb
Por prestaciones me inclinaria por los alto, por el SPL, por el rango de frecuencia y por los w. Aunque me hace dudar lo de siempre, la marca.
Para esta compra ya destino más de lo que tenía pensado, ya que aunque de forma polivalente no van salir demasiadas veces.
¿Cuál es vuestra opinión?
Saludos
Después de mucho navegar y navegar por internet, leyendo y comprando. Me he decidido a comprar un par de estos altavoces, los DB TECHNOLOGIES CROMO 10+ o los ALTO PROFESIONAL TS-110A.
Los DB TECHNOLOGIES
TECHNICAL DATA
Speaker Type: 2-Way Active Speaker
ACOUSTICAL DATA
Frequency Response [-10dB]: 65 - 20.000 Hz
Frequency Response [+/- 3dB]: 70 - 19.000 Hz
Max SPL: 121 dB
HF: 1 "
Type HF: Compression driver
Directivity: 90/70 x 60 °
Horn: Asymmetrical CD Horn
LF: 10 "
AMPLIFIER
Amp Technology: Digipack™
Amp Class: Class D
Power PRG: 400 Watt
PROCESSOR
Controller: DSP 24bit/48kHz
System Presets: Flat, Processed
Limiter: Dual Active Peak, RMS, Thermal
INPUT
MECHANICS
Housing: Polyporpylen PP
Angles Up: Monitor use 43 °
Width: 320 mm (12.8 in)
Height: 508 mm (20.32 in)
Depth: 297 mm (11.88 in)
Weight: 12 kg (26.46 lbs)
y los ALTO
TECH INFORMATION
Transducer Low: 10" Woofer with 1.5" voice coil
Transducer High: Neodymium compression driver, 1” exit with 1” voice coil
Power Amplification: 600 Watts peak (470 W LF + 130 W HF), 300 Watts continuous (235 W LF + 65 W HF)
Frequency Range: (-10 dB): 53 Hz - 20 kHz
Frequency Response: (±3 dB): 70 Hz - 19 kHz
Maximum SPL @ 1m: 123 dB peak, 120 dB continuous
-6 dB Nominal Coverage: 80° / 100° x 60° nominal
Active Crossover: 2.5 kHz
Connectors: 2 x Mic / Line Female XLR - 1/4” combo inputs, 1 x Loop - Out Male XLR
Input Control: Line / Mic -∞ to +50 dB, Maximum input level +23 dBu , Input Impedance 15 kOhms
External Controls: Volume, Power switch with LED indicator, Clip/Limit LED, Ground Lift switch
Protection Features: Over-excursion, Thermal, Driver
AC Power: 100 VAC, or 110 – 120 VAC, or 220 - 240 VAC (50 / 60 Hz)
Enclosure: Trapezoidal, with floor monitor capability. Injection molded, polypropylene enclosure, with perforated steel grille
Mounting: Integrated pole-socket (36 mm dia.) One Handle, four M10 threaded sockets: 2 top, 2 bottom
Dimensions (WxLxH): 20.2in x 12.99in x 11.73in
Weight: 26.6 lb
Por prestaciones me inclinaria por los alto, por el SPL, por el rango de frecuencia y por los w. Aunque me hace dudar lo de siempre, la marca.
Para esta compra ya destino más de lo que tenía pensado, ya que aunque de forma polivalente no van salir demasiadas veces.
¿Cuál es vuestra opinión?
Saludos
