Monitores Dynaudio BM5 o BM6 - Cual es la diferencia

#1 por nafgul el 23/11/2004
Hola!

Estoy apunto de comprarme unos monitores de respuesta plana. Estoy dudando entre los Dynaudio bm5 o los bm6. En tiendas me dicen que son iguales i solo cambia la potencia y en otras me dicen que cambia tambien la circuiteria. Alguien puede ayudarme?

Gracias
Subir
#2 por Eduardoc el 23/11/2004
No escribas con mayúsculas, por favor.


Dynaudio BM5 Specifications

System: Two-way Passive Nearfield Monitor
Frequency Response (+/- 3 dB): 55 Hz - 29 kHz
Peak SPL 1m, pair (IEC Short Term): > 126 dB peak
Peak SPL 2m, 5.1 (IEC Short Term): > 127.5 dB peak
Max SPL 1m, (IEC Long Term): 104 dB RMS
Amplifier minimum: 30 W (> 94 dB SPL @ 1m)
Sensitivity (2.83 V/1m): 87 dB
Impedance, Nominal: 4 ohm
Impedance, HF (200 kHz): 10.4 ohm
Resonance Frequency: 50 Hz
Internal Cabinet Volume: 9.1 liters
Bass Principle: Bass reflex
Crossover Frequencies: 4500 Hz
Crossover Slope: 12 dB/oct
Tweeter: 1.1” soft dome, Neodymium magnet, Pure aluminum wire voice coil, Magnetic shielded
Woofer: 6.9”, One-piece molded poly-prop cone, 3” pure aluminum voice coil


Dynaudio BM6 Specifications

System: Two-way Passive Nearfield Monitor
Frequency Response (+/- 3 dB): 43 Hz - 20 kHz
Peak SPL 1m, pair (IEC Short Term): > 125 dB peak
Peak SPL 2m, 5.1 (IEC Short Term): > 126.5 dB peak
Max SPL 1m, (IEC Long Term): 103 dB RMS
Amplifier minimum: 40 W (> 94 dB SPL @ 1.5m)
Sensitivity (2.83 V/1m): 86 dB
Impedance, Nominal: 4 ohm
Impedance, HF (200 kHz): 5.4 ohm
Resonance Frequency: 54 Hz
Internal Cabinet Volume: 10.5 liters
Bass Principle: Bass reflex
Crossover Frequencies: 3100 Hz
Crossover Slope: Woofer 6 dB/oct; Tweeter 12 dB/oct
Tweeter: Esotec 1.1” soft dome, Magnetic fluid, Rear chamber, Pure aluminum wire voice coil, 0.16" die-cast aluminum front
Woofer: 6.9”, One-piece molded poly-prop cone, 3” pure aluminum voice coil.
Subir
Respuesta rápida

Regístrate o para poder postear en este hilo